SnSxSe2-x单晶纳米片的可控制备与表征

锡二硫族化合物可以通过改变硫和硒的含量来连续调控三元合金材料的带隙、载流子浓度等物理化学性质,在电子和光电子器件应用上具有巨大的潜力。本文采用化学气相沉积(CVD)技术可控地制备了不同元素组分的SnS_xSe_2-x(x=0,0.2,0.5,0.8,1.0,1.2,1.5,1.8,2.0)单晶纳米片。采用扫描电子显微镜(SEM)、原子力显微镜(AFM)、能量色散X射线光谱(EDS)、透射电子显微镜(TEM)以及拉曼光谱等手段对SnS_xSe_2-x纳米片进行了综合表征。结果表明本方法成功实现了元素百分比可调的SnS_xSe_2-x单晶纳米片的可控制备。重点研究了依赖于元素百分比的SnS_xSe_2-x的拉曼特征谱,实验结果与基于密度泛函理论(DFT)的第一性原理计算得到的SnS_xSe_2-x的拉曼仿真谱高度吻合,理论计算结果较好地诠释了实验拉曼光谱发生变化的原因。本研究提供了一种元素百分比可调的三元SnS_xSe_2-x单晶纳米片的可控制备方法,同时对锡二硫族化合物的明确、无损识别提供了方案。     

石英晶体板非线性高频振动的拓展伽辽金法分析

针对考虑几何和材料非线性的石英晶体板厚度剪切振动和弯曲振动的方程组,利用扩展伽辽金法对该方程组进行转化和求解,分别获得了强烈耦合的厚度剪切振动模态和弯曲振动模态的频率响应关系,绘制了不同振幅比和不同驱动电压影响下的频率响应曲线图。数值计算结果表明可以选取石英晶片的最佳长厚比尺寸来避免两种模态的强烈耦合。驱动电压的变化将引起石英晶体谐振器厚度剪切振动频率的明显改变,必须将振动频率的漂移值控制在常用压电声波器件的允许值之内。扩展伽辽金法对石英晶体板非线性振动方程组的求解为非线性有限元分析和偏场效应分析奠定了基础。     

A Free Boundary Problem for Some Modified Predator-Prey Model in a Higher Dimensional Environment

Applications of Mathematics - We focus on the free boundary problems for a Leslie-Gower predator-prey model with radial symmetry in a higher dimensional environment that is initially well populated...     

Uncertain seepage equation in fissured porous media

Fuzzy Optimization and Decision Making - Seepage equation in fissured porous media is a partial differential equation describing the variation of pressure of a given area over time. In traditional...     

Nonseparating Independent Sets and Maximum Genus of Graphs

Acta Mathematicae Applicatae Sinica, English Series - A subset I of vertices of an undirected connected graph G is a nonseparating independent set (NSIS) if no two vertices of I are adjacent and G...     

Solvothermal synthesis of transition metal (iron/copper) and nitrogen co−doped carbon nanomaterials: comparing their peroxidase−like properties

Journal of Nanoparticle Research - Polycrystalline metallic copper nanoparticle samples with the average particle sizes ranging from 53 to 80 nm were controllably prepared by the wet...     

基于无人机探测大柴旦地区近地层气溶胶特征

通过改装多旋翼无人机（UAV）和搭载各类载荷以及联合地基观测设备对大柴旦地区大气、环境以及气溶胶参数进行测量。利用获得的数据资料，对该地区近地层气溶胶粒子数浓度（即单位体积空气中气溶胶粒子的数目）、消光系数以及气象要素等特征进行了分析。结果表明，在大柴旦地区，近地层气溶胶粒子数浓度日变化显著，呈现双峰形态，气溶胶粒子数浓度的变化范围为75～220 cm^-3,消光系数的变化范围为0.004～0.038 km^-1;当风速小于6 m/s时，气溶胶粒子数浓度与风速呈负相关关系；当风速大于6 m/s时，二者呈正相关关系；相对湿度对气溶胶粒子的影响较小，这可能是由于该地区以沙尘型气溶胶为主，吸湿性较弱。本研究基于多旋翼无人机探测平台，可以有效地获得近地层精细化大气、环境结构，有助于研究人员了解该地区气溶胶的结构、变化特征以及建立气溶胶模式，同时也为气溶胶及大气环境参数探测方法提供了技术支撑及思路拓展。     

Piezoelectric Nanogenerator Based on Electrospun Cellulose Acetate/Nanocellulose Crystal Composite Membranes for Energy Harvesting Application

Nanogenerators, as the typical conversion of mechanical energy to electrical energy devices, have great potential in the application of providing sustainable energy sources for powering miniature devices. In this work, cellulose acetate/cellulose nanocrystal(CA/CNC) composite nanofiber membranes were prepared by electrospinning method and then utilized to manufacture a flexible pressure-driven nanogenerator. The addition of CNC not only increased the content of piezoelectric cellulose I crystallization but also strengthened the mechanical deformation of the nanofiber membranes, which could greatly enhance the piezoelectric performance of CA/CNC composite membranes. The CA/CNC composite nanofiber membrane with 20%(mass fraction) of CNC(CA/CNC-20%) showed optimal piezoelectric conversion performance with the output voltage of 1.2 V under the force of 5 N(frequency of 2 Hz). Furthermore, the output voltage of the CA/CNC-20% nanogenerator device exhibited a linear relationship with applied impact force, indicating the great potential in pressure sensors.     

Chelating Metal Ions in a Metal-Organic Framework for Constructing a Biomimetic Catalyst Through Post-modification

Crystal engineering, as a burgeoning technology, has been widely used to construct metalloporphyrins biomimetic catalysts. Herein, a bimetallic metal-organic framework (MOF) was constructed by 4-(4-carboxyphenyl)-1,2,4-triazole ligand, Co²⁺ and Zr⁴⁺ metal ions by solvothermal reaction(named PFC-88). A N,N-chelation site was found between the two adjacent ligands in PFC-88, consequently a porphyrin-like structure was obtained through chelating Fe³⁺ in this site by post-modification, named PFC-88-Fe. The result of a single crystal X-ray technology verified that Fe ions were successfully metalated in the N,N-chelation site of PFC-88, which is assisted by the X-ray absorption near-edge structure(XANES) spectra. An o-phenylenediamine oxidation reaction was applied to assessing the catalytic activity of PFC-88-Fe, in which the absorbance increases of phenazine-2,3-diamine at λ=418 nm were recorded by absorption spectroscopy in kinetic mode, exhibiting the application potential as a biomimetic catalyst.